| Customization: | Available |
|---|---|
| After-sales Service: | One-Stop Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The cantilever climbing formwork CB-240 is mainly used for large-area concrete pourings, such as for dams, piers, anchors, retaining walls, tunnels, and basements. The lateral pressure of concrete is borne by anchors and wall-through tie rods so that no other reinforcement is needed for the formwork. It is featured by its simple and quick operation, wide range adjustment for one-off casting height, smooth concrete surface, and economy and durability.
The cantilever climbing formwork CB-240 has lifting units in two types: diagonal brace type and truss type. The truss type is more suitable for cases with heavier construction loads, higher formwork erection, and smaller scope of inclination.
The main difference between CB-180 and CB-240 is the main brackets. The width of the main platform of these two systems is 180 cm and 240 cm respectively.
1. Bracket, formwork, and construction load are all borne by embedded anchors and wall-through tie rods. No additional scaffolding is needed. It is suitable for construction in the high air.
2. The maximum height of the concreting can reach 6 meters, and the whole part of the formwork can be moved back to 600 mm.
3. The formwork part can be adjusted up and down, and from left to right, relative to the supporting bracket, and the diagonal brace-type formwork can be tilted back and forth.
4. Each connecting part has a high degree of standardization and versatility.
5. The formwork can be adjusted to stick tightly to the concrete surface so as to avoid leaking or misaligning.
6. The bracket system is provided with a suspended platform to facilitate the removal of the anchoring parts and the appearance treatment of the concrete.
Packaging:
1. Generally, the total net weight of a loaded container is 22 tons to 25 tons, which needs to be confirmed before loading.
2. Different packages are used for different products:
---Bundles: Timber beam, steel props, tie rod, etc.
---Pallet: Small parts will be put in bags and then on pallets.
---Wooden cases: It is available at the customer's request.
---Bulk: Some irregular goods will be loaded in bulk in the container.
Delivery:
| 1 | Production: For a full container, normally we need 20-30 days after receiving the customer's down payment. |
| 2 | Transportation: It depends on the destination charge port. |
| 3 | Negotiation is needed for special requirements. |
Q: Are you a trading company or manufacturer?
A: We are a factory.
Q: How long is your delivery time?
A: Generally it is 5-15 days if the goods are in stock or 15-20 days if the goods are not in stock. It is according to quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample free of charge but do not pay the cost of freight.
Q: What are your terms of payment?
A: Payment<= 1000 USD,100% in advance.Payment>= 1000 USD,30% T/T in advance, balance before shipment.
Any questions, please feel free to contact us!
){kind=link}